Proper plumbing in your bathroom allows you to flush the toilet, fill the bathtub and shower, and use the sink. Frequent use makes this room prone to plumbing issues, like leaks, running toilets, and slow drains. When such problems arise, contact plumbing companies for timely diagnosis and repair. Here are a few signs your bathroom needs a plumber:
1. Low Water Pressure
If you no longer get a steady stream of water from your shower and taps, these issues signify low water pressure. This plumbing problem results from clogs, which restrict water flow. Other causes of low water pressure include a broken pressure regulator, leaks, and incorrect pipe sizes. Failure to partner with plumbing companies to solve water pressure problems forces the water heater to work harder to push water at your desired temperature. The added stress causes energy inefficiency and premature wear of the water heater.
2. Slow Drainage
Slow-draining sinks and bathtubs disrupt routines and hamper bathroom hygiene. This issue may be caused by a blockage in the drain pipes. The main cause of blocked pipes is flushing hair, wet wipes, and sanitary towels down the toilet drains. Since these items don’t dissolve in water, they accumulate and eventually cause clumps that restrict water flow.
The other cause of clogged plumbing pipes is mineral accumulation. This issue is common in areas with hard water due to calcium and magnesium building up inside the pipes. Mineral buildup also leads to pipe corrosion, narrowing the interior diameter of the drains. Installing a water softener can prevent the problem.
Slow drains may also signify pipe damage or misalignment. Pipes shift or wear out over time due to age or ground movement. Misalignment of pipes reduces water flow, causing slow drainage. The restrictions also make the water struggle to move through the pipes, causing an increase in pressure. The high pressure weakens the pipe joints, leading to cracks or leaks. If this problem is not resolved early, the stress causes the pipes to burst, leading to costly repairs.
3. Toilet Backups
A backed-up toilet can be caused by various issues. The common cause is clogged pipes, which result from wipes, feminine hygiene products, and other non-flushable items. Insufficient tank water levels are another possible cause. If your toilet tank lacks enough water, it does not generate sufficient force to flush waste and clear the line, causing frequent backups.
Toilet backups may emanate from worn-out toilet seals. The toilet base features a wax ring that creates a seal between the toilet and the drainpipe. If the seal wears out, the problem causes leaks from the drainpipe to the toilet, leading to a backup. The backups may also indicate an overloaded septic tank. When the septic reaches its capacity, it cannot hold more waste from the toilet and will force it back to your home.
Consult Plumbing Companies for Bathroom Repairs
Proper bathroom plumbing provides constant access to water and promotes sanitization and convenience. Recognizing signs that your system is failing will allow you to quickly contact plumbing companies before minor issues escalate to major repairs. Contact professionals who have the expertise to diagnose and repair plumbing problems to maintain a healthy bathroom.
